Building Instructions
Once you have settled on a design, you must create a set of step-by-step instructions that will guide you through the build of your transport system.
|
Mark's Building Instructions
Building the Main Containment Unit
Step 1: Measure circumference of egg and use the circumference to find diameter of circle. Use this diameter to draw two circles that will form the frame of the Main Containment Unit or Roll Cage. Using 8 straight pieces of pasta per circle, glue together the frame. Step 2: For one circle, cut eight 2 inch long pieces and glue at joints and then glue together at top to form a kind of pyramid. For the second circle, do the same but with eight 3 inch pieces. |
Buiding the Rolling Surfaces
Step 3: Draw a two circles with diameters of 5 inches. Create sixteen 2.5 inch spokes. Glue these in the center so that they radiate out to form the spokes of a wheel. Step 4: Cut sixteen 1 inch pieces that will form the rim. Glue these in place to form the rim of the wheel. Step 5: Repeat for your second wheel. |
ETC....